Double Spindle Automatic Optical inspection machine CKⅡ

Product Information of ChiKin key technique aoi automated optical inspection accurate inspection for fast and accurate inspection

Company Advantages
1. Before delivery, the mechanical parts of ChiKin aoi automated optical inspection has been tested. These parts include gears, bearings, fasteners, springs, seals, couplings, and so forth. It can carve the fine detail needed for modern printed circuit boards
2. With this new technology product, fewer people are needed to manufacture. This will help manufacturers and manufacturers reduce labor costs. It is safe to use because the waste produced can simply be brushed up
3. This product has high rust resistance. Its surface is treated with a protective layer of metal oxide to avoid the effects of moisture. The product features precise depth penetration control
4. The product is highly corrosive. It can perform tasks normally even in the presence of industrial chemicals and will not come to sudden failure. The product ensures quick and easy production of PCB prototypes within hours
5. The product features heat resistance. The structural materials used in it is characterized by a low thermal expansion coefficient, which makes it keep stable under heat. All production operations performed by this product are automated

Product Information

ChiKin key technique aoi automated optical inspection accurate inspection for fast and accurate inspection-1

ChiKin key technique aoi automated optical inspection accurate inspection for fast and accurate inspection-2

AOI machine
NO.	Item	CKⅡ
1	Spindle No.	double spindle
2	Minimum line width/ line distance	2.5 mil
3	Detectable line width range	4/3/2 mil
4	maximum production	470 sides (included 3 seconds per board time )
5	Inspection size	24″* 26″
6	Inspection way	Morphological analysis based on CAM
7	Support CAM type	RS-274X;ODB++
8	Alignment way	board side
9	Defect confirmation method	check up / Use inspection machine
10	Scanning light	LED cold light
11	Control system	Windows 64 bits
12	Size	1980(D)1600(W)1750(H)mm
13	Weight	1500KG
14	Power	AC 380V (3 phase 5 wire)
15	Air pressure	2.5atm (30 psi)
16	Inspection material	copper/ gold board(include inner and outer side)/ soft board/ Dry film /Black Film
17	Checkable defect type	Short circuit/open circuit/Minimum line width/Minimum line spacing/gap/Copper deficiency/Convex copper/Copper slag/Pinhole/Porous/Missing hole/hole Blocking/hole Offset

Product Description

ChiKin key technique aoi automated optical inspection accurate inspection for fast and accurate inspection-3

▣ Novel structure and safety guarantee
▣ Quick program design and debugging integration,more convenient and quick operation;
▣ Automatic recognition of PCB surface and 180° reverse automatic identification system;
▣ Multi-program, multi-board test, making test more efficient and faster;
▣ Smart camera barcode recognition system (identifying 1D code and 2D code);
▣ Professional SPC analysis system to monitor and analyze product quality at all times;
▣ Multi-line monitoring system, all production line production status is clear
▣ Using remote programming and debugging control functions so that software control performance is stronger.

Logistics

ChiKin key technique aoi automated optical inspection accurate inspection for fast and accurate inspection-4

PACKING & SHIPPING

We support both OEM & ODM packaging. Our normally delivery method are by the sea, by air, by international express (DHL, UPS, TNT, FedEx)

Company Features
1. Shenzhen ChiKin Automation Equipment Co. , Ltd has been dedicated to the manufacturing of aoi automated optical inspection for many years, and we have become the leading enterprise in the industry. We work with customers and partners across the globe, to bring even more ideas and product solutions to any project. Our products are distributed in many countries.
2. Shenzhen ChiKin Automation Equipment Co. , Ltd always uses advanced technology to develop and produce aoi machine .
3. In order to achieve technological innovation, Shenzhen ChiKin Automation Equipment Co. , Ltd has introduced professional technicians and advanced equipment. Shenzhen ChiKin Automation Equipment Co. , Ltd now takes the lead in pcb AOI machine industry. Inquiry!

Name

E-mail

Company Name

Content

Relevant Articles

What are raw materials for CNC drill machine production?

CNC drill machine is fabricated from superior materials employing modern technology. The specific raw materials vary with projects. The very first step in a procedure is frequently the most essential. Thus manufacturers in this industry highlight much on raw materials. The quality variant of the raw materials used at the production will frequently result in variation in the character of the final products. Shenzhen ChiKin Automation Equipment Co. , Ltd mainly deals with router machine with high quality and competitive price. pcb assembly series manufactured by ChiKin include multiple types. And the products shown below belong to this type. The manufacture of ChiKin pcb router bits is of professionalism. The process mainly includes the following stages: the procurement of metal materials, fabrication of the frame, machining and assembly of component parts, and commissioning. With an integrated cast iron body, the product features high rigidity. With proper care, the surface of this product will stay shiny and smooth for years without the need to ever seal, and polish. The product is especially suitable for prototyping PCBs.We embrace sustainable development during our operation. By adopting appropriate technologies to manufacture our products, we are able to prevent and reduce environmental pollution.

What properties are needed in CNC drill machine raw materials?

The performance required for the raw materials of the CNC drill machine depends on different functional requirements. Often, raw materials produce some wonderful results. It is important to know what is important to the properties of the raw materials and how the producers influence these variables if the reliable and correct quality is to be achieved. Raw materials should meet foreign technical requirements. Shenzhen ChiKin Automation Equipment Co. , Ltd has grown to be a Chinese top manufacturer for pcb router machine. CNC drill machine series manufactured by ChiKin include multiple types. And the products shown below belong to this type. ChiKin circuit board parts is an inter infiltration result of various technologies. It is developed by the R&D team who adopts the mechanical technique, detection and sensing technology, automatic control technology, and servo drive technology. The product has been certified under CE. The product requires little maintenance. It features little need for cleaning. People can wipe the dirt or stain only using a damp cloth. The product achieves high output rate with low or no mistakes.We carry out our corporate purpose: “we create products for a sustainable future,” by pursuing ambitious goals along our entire production value chain.

How much will it take for CNC drill machine materials?

Material price is an integral focus in the production market. All manufacturers do their job to reduce the costs for raw materials. Material cost is closely related to additional expenses. If the manufacturer intends to decrease the prices for materials, technology is an option. This then will boost R&D input or will bring expenses for technology introduction. An effective manufacturer is always able to balance each cost. It might construct a complete supply chain from raw material into providers. As a domestically competitive Collet Opening Tool producer, Shenzhen ChiKin Automation Equipment Co. , Ltd is expanding its production scale. computer numeric control series manufactured by ChiKin include multiple types. And the products shown below belong to this type. Strict tests on ChiKin pcb making machine must be conducted by the QC team. These tests generally include current leakage testing, short-circuit testing and electrical load capacity testing. Due to the excellent human-computer interface, it is easy to control. This product brings the building a ‘living skin,’ enabling the building façade to ‘breathe’ in response to the environment. It is safe to use because the waste produced can simply be brushed up.We are trying to seek and use clean energy resources to support our production. In the next phase, we will seek a more sustainable packaging way.

How much will it cost for CNC drill machine production?

In this field, the price in producing CNC drill machine varies from production technologies, equipment to, material cost and so on. During the manufacturing process, modern and advanced manufacturing technology and equipment play an essential role in ensuring the performance of the goods. Professional manufacturing team will help producers save a great deal of cost and time to ensure efficient production. The labour cost is necessary during the manufacturing as well. Known as globally famous manufacturer, Shenzhen ChiKin Automation Equipment Co. , Ltd primarily deals with NSK-HGP-Grease-Gun. PCB Drill Bit series manufactured by ChiKin include multiple types. And the products shown below belong to this type. The design of ChiKin collet holder is a complex process. From 3D modeling, stress on parts, to construction, every detail is well taken care of. It is safe to use because the waste produced can simply be brushed up. Compared with other LED lighting products, this product charges a relatively low and competitive price thanks to its mature LED chips manufacturing technology which greatly cuts the production cost. The integrated cast iron worktable can suppress the deformation of PCBs to the minimal state.To be a truly sustainable company, we embrace emissions reductions and green energy and control our use of non-renewable resources.